
Hover to Zoom
Product photographs are for reference. Minor details may vary by batch.
Small bottles only?
If your caps are 80 mm or smaller, the DGYF-200 is enough. WhatsApp us the cap size.
Ask on WhatsAppCall +91 95822 69346Call +91 98184 33150DGYF-200 Semi Automatic Induction Sealing Machine 20-80 mm
Short Description
The DGYF-200 is a compact semi automatic foil sealer for small and medium bottles with 20 to 80 mm caps. A built-in timer runs each sealing cycle, so syrup, oil, sauce and pesticide bottles all get the same leak-proof seal under the cap. Generic brand, imported, priced for small units and start-ups.
Imported · Generic brand · GST invoice from PackForge
Specifications
| Brand | Generic |
| Model | DGYF-200 |
| Type | Semi automatic electromagnetic induction aluminium foil sealer |
| Sealing diameter | 20–80 mm |
| Operation | Semi automatic – the operator places the head on the cap and the timer runs the sealing cycle |
| Power supply | 220 V AC, single phase |
| Seal type | Aluminium foil (induction liner) under a plastic cap |
| Country of origin | Imported |
| HSN code | 8422 |
Power rating, sealing speed and warranty terms: ask us on WhatsApp for the current datasheet before you order.
DGYF-200 Semi Automatic Induction Sealer 20-80 mm
SKU: GEN-DGYF-200
Sold by PackForge Industries,
a division of Fulcrum Infratech Pvt. Ltd.
Not sure this is the right model? +91 95822 69346 / +91 98184 33150 — tell us the job, not the model number.
Delivery Details
Check serviceability at your location
Get customised quotes from us
Enter a valid 10 digit mobile number.
We will contact you on this number
What is the DGYF-200 induction sealing machine?
The DGYF-200 uses the same induction principle on a smaller scale: the coil in the sealing head heats only the aluminium foil of the liner, not the cap or the product. Its semi automatic timer switches the field on for the set time and off again, so the seal does not depend on how long the operator holds the head. That makes it a steady choice for small batches of 20–80 mm bottles.
DGYF-200 – 4 steps
- 1Load the capsFill the bottle and screw on a cap with an induction liner inside.
- 2Set the timer onceChoose the sealing time for that cap and liner; the timer repeats it for every bottle.
- 3Place and startPut the sealing head on the cap and start the cycle; it stops by itself when the time ends.
- 4Peel and checkPeel the first foil of every batch to confirm it bonded all round, then carry on.
Where the DGYF-200 fits
The DGYF-200 is the entry model for units that seal small and medium bottles: caps from 20 to 80 mm cover most syrup, oil, sauce, honey and agro-chemical bottles. It is compact, light on a packing table and priced for start-ups and small batches.
Semi automatic means the operator places the sealing head on the capped bottle and the timer runs the sealing cycle, so every cap gets the same heat for the same time. This gives a more even seal than judging the time by hand, and new staff learn it in a few minutes.
Set the time once for each cap and liner, seal a test bottle and peel the foil to check that it bonded all round. Keep caps tightened evenly; a loose cap is the most common reason for a patchy seal.
If your range also has wide jars or tins above 80 mm, choose the DGYF-600C (20–130 mm) instead, so one machine covers every cap.
Who uses the DGYF-200
- Syrup, tonic and supplement bottles – 28–38 mm caps that must show if the bottle was opened.
- Edible oil bottles up to 1 litre – leak-proof foil under the cap before the bottles go into cartons.
- Sauce, honey and pickle bottles – small jars up to 80 mm with a peel-off foil.
- Pesticide and liquid-fertiliser bottles – small bottles that must not leak on the way to the farmer.
Small caps seal fastest, but they are also easy to over-heat. If the foil looks brown or the cap softens, shorten the time; if the foil peels too easily, lengthen it slightly or tighten the caps more. Read induction wad sealing for more.
DGYF-200 price and other induction sealers
| DGYF-200 (this page) | 20–80 mm | ₹5,061 + ₹911 GST (₹5,972 incl. GST) |
| DGYF-600C 20-130 mm | Generic | ₹8,060 + GST |
| PackForge Heavy Duty 20-80 mm | 5-year warranty | ₹7,999 + GST |
| PackForge Heavy Duty 20-130 mm | 5-year warranty | ₹12,999 + GST |
DGYF-200 induction sealer – frequently asked questions
What is the price of the DGYF-200?
The DGYF-200 costs ₹5,061 + ₹911 GST, that is ₹5,972 including all taxes, with free delivery across India and a GST invoice in your company name.
What does semi automatic mean on the DGYF-200?
The operator places the sealing head on the capped bottle and the timer controls the sealing cycle, so each cap gets the same sealing time.
Can the DGYF-200 seal a 100 mm jar?
No. Its range is 20 to 80 mm. For caps up to 130 mm, choose the DGYF-600C or a PackForge 20-130 mm model.
Is the DGYF-200 good for a start-up?
Yes. It is the lowest-priced model in the range and suits small and medium batches of syrup, oil, sauce and pesticide bottles.
Who makes the DGYF-200?
It is a Generic-brand imported machine, sold and supported by PackForge Industries, Faridabad.