
Hover to Zoom
Product photographs are for reference. Minor details may vary by batch.
Sealing wide jars?
Send a photo of your largest cap. If it is up to 130 mm, the DGYF-600C will cover it.
Ask on WhatsAppCall +91 95822 69346Call +91 98184 33150DGYF-600C Induction Sealing Machine 20-130 mm
Short Description
The DGYF-600C is a wide-range hand-held induction sealer: one machine for 20 mm pharma bottle tops up to 130 mm ghee jars and tubs. Its sealing head melts the foil wad under each cap onto the container rim, so every jar leaves the packing table airtight and visibly tamper-proof. Generic brand, made in India.
Generic brand · Made in India · sold with GST invoice
Specifications
| Brand | Generic |
| Model | DGYF-600C |
| Type | Hand-held electromagnetic induction aluminium foil sealer |
| Sealing diameter | 20–130 mm |
| Operation | Hand held – the sealing head is brought to each capped bottle |
| Power supply | 220 V AC, single phase |
| Seal type | Aluminium foil (induction liner) under a plastic cap |
| Country of origin | India |
| HSN code | 8422 |
Power rating, sealing speed and warranty terms: ask us on WhatsApp for the current datasheet before you order.
DGYF-600C Induction Sealer 20-130 mm
SKU: GEN-DGYF-600C
Sold by PackForge Industries,
a division of Fulcrum Infratech Pvt. Ltd.
Not sure this is the right model? +91 95822 69346 / +91 98184 33150 — tell us the job, not the model number.
Delivery Details
Check serviceability at your location
Get customised quotes from us
Enter a valid 10 digit mobile number.
We will contact you on this number
What is the DGYF-600C induction sealing machine?
Inside the DGYF-600C control box an oscillator drives a high-frequency current through the copper coil in the hand-held head. When the head sits on a capped container, the field passes through the plastic cap and warms only the thin aluminium layer of the liner; its heat-seal coat melts onto the rim and the jar or bottle is closed with a peel-off foil. On a 130 mm tub the head covers the full cap face, so the whole ring is sealed in one go.
DGYF-600C – 4 steps
- 1Match the linerUse caps with an induction liner made for your container: PET, HDPE, PP or glass.
- 2Tighten evenlyScrew every cap to the same torque; wide caps lift at one side if they are loose.
- 3Time per cap sizeSet a short time for 20–40 mm caps and a longer one for 100–130 mm jars, then peel a test seal.
- 4Head centredRest the hand-held head flat and centred on the cap, seal, lift and move to the next jar.
Where the DGYF-600C fits
The DGYF-600C covers the widest cap range of the Generic models: from a 20 mm pharma bottle cap up to a 130 mm wide-mouth jar. A unit that packs both small bottles and large tubs can run one machine instead of two, and simply change the sealing time when the cap size changes.
The sealing head is hand held and connected to the control box by a cable, so bottle height never matters. Tall oil cans, short ointment jars and 5 kg tubs are sealed the same way: the head goes onto the cap, not the container into the machine. It works on a packing table or next to a slow filling line.
Wide caps need a little more care than small ones. Keep the head centred so the whole foil ring heats evenly, use a slightly longer time for a 100–130 mm cap than for a 30 mm cap, and peel a test seal after every change of cap or liner. If the foil lifts at one side, the cap is not tightened evenly or the head is off-centre.
Choose the DGYF-600C for regular daily sealing at a lower price. If the sealer must run the whole shift on a busy line, the PackForge Heavy Duty 20-130 mm model with its 5-year warranty is the better fit.
Who uses the DGYF-600C
- Ghee, oil and edible-fat tins and jars – wide 80–130 mm mouths that need a full foil ring before dispatch.
- Protein powder, health-mix and spice tubs – large jars where a peel-off foil keeps moisture out after filling.
- Paint, lubricant and agro-chemical containers – wide caps that must not leak in transport.
- Pharma and Ayurvedic bottles – small 20–40 mm caps on the same machine, so one sealer covers a mixed range.
Wide-mouth caps are where most sealing faults appear: an uneven cap, a liner made for another container material, or a head held off-centre. Test one jar from every new lot of caps before running the batch. Read induction wad sealing for more.
DGYF-600C price and other induction sealers
| DGYF-600C (this page) | 20–130 mm | ₹8,060 + ₹1,451 GST (₹9,511 incl. GST) |
| DGYF-200 Semi Automatic 20-80 mm | Generic | ₹5,061 + GST |
| PackForge Heavy Duty 20-80 mm | 5-year warranty | ₹7,999 + GST |
| PackForge Heavy Duty 20-130 mm | 5-year warranty | ₹12,999 + GST |
DGYF-600C induction sealer – frequently asked questions
What is the price of the DGYF-600C?
The DGYF-600C costs ₹8,060 + ₹1,451 GST, that is ₹9,511 including all taxes, with free delivery across India and a GST invoice in your company name.
Can the DGYF-600C seal a 120 mm jar?
Yes. Its range is 20 mm up to 130 mm, so a 120 mm wide-mouth jar is within range. Use a longer sealing time than for small caps and keep the head centred.
Can one DGYF-600C seal both small bottles and big tubs?
Yes. Change only the sealing time when the cap size changes; the same hand-held head seals a 20 mm pharma cap and a 130 mm jar.
Is the DGYF-600C made for all-day production?
It suits regular daily sealing. For long shifts on a busy filling line, the PackForge Heavy Duty 20-130 mm model is built for continuous work and carries a 5-year warranty.
Who makes the DGYF-600C?
It is a Generic-brand machine made in India, sold and supported by PackForge Industries, Faridabad.