Skip to content
Machines& Material Handling
Buy on Chat Login
PackForge Buy on Chat 0
Pallet and box wrappers · step by step

How to Use a Stretch Wrapping Machine

A clear routine for wrapping pallets and boxes on PackForge turntable stretch wrappers, with the one setting that decides most results: film force. Use it to train a new operator or to fix loads that arrive loose.

Buy Stretch Wrapping Machines online

Price + 18% GST · free delivery across India · Buy Now or Add to Cart

View all →
TrendingTurntable stretch wrapper
Made In India

Turntable stretch wrapper

SKU: PF-TSW-01

by PackForge ( Made in India )

₹1,36,500+ ₹24,570 GST₹2,13,280
Save ₹76,780 (36% OFF)
Quick answer: To use a stretch wrapping machine, set the loaded pallet in the centre of the turntable on a level floor. Pull film from the carriage roll, tie the tail to a pallet corner and choose the film force for that load. Start the cycle: the table turns while the carriage climbs and comes down, laying overlapping bands. Stop, cut the film, press the tail down and lift the pallet away.

Know your wrapper before the first load

PackForge stretch wrappers all turn the load past a film carriage, but they suit different loads:

Before you start

  • Level floor: a turntable on a slope leans the load a little more with every turn.
  • Space around the machine: keep a clear path for the pallet truck or forklift and for walking round the load.
  • Right film: use machine film wound for powered wrappers, in the width and core your carriage takes. Hand film will not run properly on a machine.
  • Stable stack: build the pallet square, with no cartons hanging over the edge.
  • Air supply: models with a pneumatic top plate need compressed air connected before use.
Turntable stretch wrapper
Turntable stretch wrapper

How to use a stretch wrapping machine, step by step

  1. Load the pallet: place it in the middle of the turntable. On the SW2100, run the hand pallet truck up onto the 85 mm high table and leave the load centred.
  2. Fit the film: load the roll on the carriage and thread it along the path shown on the machine.
  3. Tie the tail: pull film from the carriage and tie or tuck it to a lower corner of the pallet.
  4. Choose the settings: set the film force and the wrap pattern, or pick the stored programme for this load on a PLC model.
  5. Lower the top press on machines that have one, for light or uneven stacks.
  6. Start the cycle: the turntable spins while the carriage climbs and comes down, laying overlapping bands from base to top. Extra turns at the base lock the lowest layer to the pallet.
  7. Stop and cut: when the cycle ends, cut the film and press the tail flat against the load.
  8. Lift the top press and take the load away for dispatch.

How to set film force

Film force is the setting that decides the result. Too high, and the outer cartons crush; too low, and the load walks in transit. Set it on your weakest load: the most crushable carton you ever wrap.

LoadFilm forceWrap pattern
Firm cartons, square palletModerate, tested on the loadOverlapping bands, extra base turns
Light or crushable cartonsLowMore turns rather than more force; use the top press
Tall, light stacksLow to moderateTop press or top plate down; extra top turns
Heavy, dense palletsHigher, within the machine's rangeExtra base turns to tie load to pallet
Sharp cornersModerateProtect corners; ask about a tougher film

Run a trial with the weakest load, record the setting that works and use it for every shift. On PLC models, save it as a programme.

Common mistakes and quick fixes

ProblemLikely causeFix
Load arrives looseOily goods let film slide, or the load settled after wrappingAdd base and top turns; tell us the goods
Cartons dentedFilm force too highLower the force; add turns instead
Film keeps breakingTension set high, worn roller, thin film, sharp cornerLower tension; check rollers; protect corners
Top of the load comes looseToo few turns at the topChange the wrap pattern, not the film
Load leans while turningPallet off centre or floor not levelCentre the pallet; level the machine

Thicker film does not fix a bad wrap pattern; the number of turns and where they go matter more than the micron.

PackForge SW2100 Pallet Stretch Wrapping Machine
PackForge SW2100 Pallet Stretch Wrapping Machine

Safety around a wrapper

  • Stay clear of the turntable and the carriage while the cycle runs.
  • Do not step onto the turntable or reach across it to fix film while it moves.
  • Stop the machine before tucking a loose tail or freeing a jammed roll.
  • Keep the top press clear of hands when it lowers.
  • For loads lifted by hook or shunted by rail, add strapping through the pallet; film does not hold a load to its base.

Film, spares and service

Machine film is priced on width, micron, core and quantity; see stretch film rolls. Film carriage rollers and belts wear with use, and turntable bearings slowly; both are on wrapping machine spares. These are wear parts, outside the 12-month warranty on manufacturing defects. If the turntable becomes noisy, ask for an engineer on +91 95822 69346 rather than ordering bearings one by one.

Rates: turntable stretch wrapper ₹1,36,500 + ₹24,570 GST; box wrapper with top press ₹1,73,890 + ₹31,300 GST; BW600 PLC ₹70,784 + ₹12,741 GST; SW2100 ₹3,67,360 + ₹66,125 GST. Compare them on the stretch wrapping machines page or the stretch wrapping machine price list.

Loads still arriving loose?

Send a photo of a wrapped pallet, its height and weight, the goods and your wrapper model. We will suggest the film force and pattern.

Questions buyers ask

What film force should I use on a stretch wrapper?

Enough to hold the load without denting it, set on your own weakest pallet. Run a trial, record the setting that works and use it every shift. On PLC models, save it as a stored programme.

How many times should the film go round a pallet?

There is no fixed count. Use overlapping bands from base to top, with extra turns at the base to tie the load to the pallet and at the top for tall or light stacks. Test on your own loads.

Stretch wrapping machine kaise chalate hain?

Pallet ko turntable ke beech mein rakhein, film ka sira pallet ke kone se baandhein aur film force set karein. Start dabane par table ghoomti hai aur film upar-neeche lipat-ti hai. Ant mein film kaat kar sira daba dein.

Can I use hand stretch film on a wrapping machine?

No. Hand film is made to be stretched by a person, while machine film is wound for the carriage of a powered wrapper. Hand film will not run properly on a machine.

Why does the film keep breaking?

Common causes are tension set too high, a worn carriage roller, film too thin for the load, or a sharp corner on the pallet. Send a photo of the break and the load and we will help narrow it down.

Do I need three-phase power?

Not for the turntable stretch wrapper, the box wrapper with top press or the BW600 PLC, which run on a single-phase 220 to 230 V supply.

Send your requirement

Tell us the job rather than the model number — what you pack, how many a day and the city.

Call +91 95822 69346+91 98184 33150

Please put in a name and a mobile number we can reach.

Delivery is free anywhere in India, and GST is shown separately on every rate.

Written by the PackForge Technical Team, Faridabad. Updated 22 November 2026.

New Here? Grab Up to 10% Off Your First Order.

Subscribe with your email for first-order offers, deals and new arrivals.

Related machines and guides

Main machines

Carton Sealing Machine|Impulse Sealer|Heat Sealing Machine|Hand Sealing Machine|Strapping Machines and Tools|Stretch Wrapping Machines|Continuous Band Sealing Machine|Cup Sealing Machine|Induction Sealing Machine|Handheld Inkjet Printer

By product range

Fully Automatic Strapping Machines|Semi Automatic Strapping Machines|Low Table Top Strapping Machines|Pneumatic Strapping Tools|PP Strap Rolls|Strapping Machine Spares|Semi Automatic Carton Sealing Machines|Compact Carton Sealing Machines|Automatic Random Carton Sealing Machines|BOPP Tape Rolls|Carton Sealer Spares|Box Wrapping Machines with Top Press|Turntable Stretch Wrappers|Stretch Film Rolls|Wrapping Machine Spares|Hydraulic Hand Pallet Trucks|Drum Carriers & Lifters|Pallet Truck Spares & Wheels|Material Handling Trolleys|Machine Spare Parts

Machines and consumables

Fully Automatic Strapping Machine, PP Strap, Touch HMI|Semi Automatic Strapping Machine, Arch Type, PP Strap|Low Table Top Semi-Automatic Strapping Machine, Compact|Pneumatic strapping tool, PP and PET strap|Machine-grade PP strap|Semi Automatic Carton Sealing Machine, Top & Bottom Tape|Compact Carton Sealing Machine for Small Cartons|Automatic Random Carton Sealing Machine, Auto Size Adjust|Box Wrapping Machine with Top Press, Turntable Stretch Wrapper|Turntable stretch wrapper|Hydraulic Hand Pallet Truck, 2.5 Ton Capacity, Nylon / PU Wheels|Material Handling Drum Carrier & Lifter, 350 kg Capacity|Platform trolleys

Hand sealing machines

Hand Sealer|Poly Bag Sealing Machine|Pouch Sealing Machine|Packet Sealing Machine|Plastic Bag Sealing Machine|Bag Sealing Machine|8 Inch Hand Sealing Machine|12 Inch Hand Sealing Machine|16 Inch Hand Sealing Machine|Foot Sealing Machine|Table Top Sealing Machine|How to Choose a Hand Sealing Machine|Hand Sealer or Band Sealer?

Bengaluru

Packaging Machines in Bengaluru|Carton Sealing Machine in Bengaluru|Hand Sealing Machine in Bengaluru|Cities We Supply

PackForge AssistantFaridabad works · packaging, material handling, agriculture
ContactWhatsAppCall