Skip to content
Machines& Material Handling
Buy on Chat Login
PackForge Buy on Chat 0
Warm-up to sealed pouch · CS900

How to Use a Continuous Band Sealer

A continuous band sealer seals pouches while they travel, so the skill lies in the setting and in how the pouch is fed. This guide takes an operator through warm-up, heat and speed, the date coding wheel and the feeding habits that decide seal quality.

Buy Band Sealing Machines online

Price + 18% GST · free delivery across India · Buy Now or Add to Cart

View all →
Quick answer: To use a band sealer, switch on and let the heating blocks reach temperature for a few minutes. Set the heat and belt speed to suit your film, fit the date characters in the coding wheel, then run a scrap pouch. Feed each filled pouch with its mouth flat and square into the moving bands, keep the fill well below the seal line, and check the first seals before the full run.

How a band sealer differs from a hand sealer

On a hand impulse sealer the bar heats for each bag. On a continuous band sealer the heating blocks stay at a held temperature, and two moving bands carry the pouch mouth through a heating zone, a cooling zone and the coding wheel without stopping. That gives two working rules:

  • Heat and speed work together: the time a pouch spends between the blocks depends on the belt speed. A faster belt needs more heat for the same film, a slower belt less.
  • Feeding decides quality: the machine seals whatever it is given. A creased mouth gives a creased seal.

Which machine you have also matters. The PackForge CS900 continuous band sealer comes as the CS900L, with pouches lying flat, and the CS900V, with pouches standing upright for powders and granules.

How to use a band sealer, step by step

  1. Place the machine on a firm table with space on the infeed side to line up filled pouches.
  2. Switch on and warm up: the blocks take a few minutes to reach temperature. Do not feed pouches before that.
  3. Set the temperature: the CS900 range is adjustable up to 300 °C. Begin at a moderate setting as your manual suggests, not at the top.
  4. Set the belt speed: the CS900 and CS1100 run from 0 to 12 metres a minute. Start slower while you set the heat.
  5. Fit the date: place the embossing characters for the packing date, or the batch, in the coding wheel.
  6. Run a scrap pouch: use an empty pouch of the same film and check the seal and the code.
  7. Adjust one thing at a time: change either heat or speed, then test again, until the seal is even and clear.
  8. Feed real pouches: guide each mouth straight into the bands without folds, fill level well below the seal area.
  9. Check the first few: press each sealed pouch and look at the seal against the light before carrying on.
PackForge CS900 Continuous Band Sealer | Horizontal & Vertical Pouch Sealing Machine
PackForge CS900 Continuous Band Sealer | Horizontal & Vertical Pouch Sealing Machine

How do I set temperature and speed?

PackForge does not give one fixed setting for every pouch, because film type and thickness change the answer. Use this pattern on scrap pouches:

What the test seal showsAdjust
Seal peels open, film looks unchangedRaise the heat a little, or slow the belt
Seal brown, shrunk or wavyLower the heat, or speed up the belt
Film melts throughLower the heat clearly; check the film thickness
Seal good but code faintCheck the characters are seated in the wheel
Even, flat seal and clear codeNote the heat and speed for that pouch

Write the setting for each pouch type and keep it beside the machine. Most models take film up to about 0.08 mm; thick laminates and woven sacks of 0.12 to 0.18 mm need the PackForge CS1680 heavy duty continuous band sealer.

Feeding habits that give clean seals

  • Flat and square: present the pouch mouth straight to the bands; a fold at the end leaves a tiny channel that leaks at the corner.
  • Clean mouth: powder, oil or masala in the seal line spoils it. Use a funnel when filling.
  • Right model for the product: loose namkeen, powders and grain stay upright on a vertical model.
  • Weight on the belt: the CS900 belt carries packs up to 3 kg; the wide CS900LW / VW takes 5 kg; the PackForge CS1100 10 kg band sealer takes 10 kg.
  • Two people at volume: one person filling and one feeding keeps the machine working instead of waiting.
  • Steady spacing: line up pouches on the infeed side so they enter one after another at an even gap.

Safety and shutdown

  • Keep hands, sleeves and loose cloth away from the moving bands and the hot blocks.
  • Never reach into the seal zone while the belts run.
  • At the end of the shift, run the belt empty for a moment, switch off and let the blocks cool before wiping the machine.
  • Unplug before cleaning or changing the date characters, if the wheel sits close to the heated zone.
PackForge CS1100 10 KG Band Sealer | Heavy Pouch Sealing Machine
PackForge CS1100 10 KG Band Sealer | Heavy Pouch Sealing Machine

Wear parts and when to call service

The moving bands and the heating elements are wear parts, excluded from the 12-month warranty on manufacturing defects. Keep the bands clean of melted film and powder. If seals stay poor at every setting, the bands are not moving evenly, or the machine does not heat, see band sealer troubleshooting, then call +91 95822 69346 with a short video. Spares and upkeep plans are on spares and AMC.

PackForge band sealers and rates

ModelUseRate
CS900 (L / V)General pouches up to 3 kg, date embossingfrom ₹12,812 + ₹2,306 GST
CS900AFAir or nitrogen flushing₹40,320 + ₹7,258 GST
CS900LW / VWWide conveyor, packs up to 5 kg₹48,025 + ₹8,645 GST
CS1100Bags up to 10 kg₹95,872 + ₹17,257 GST
CS1680Heavy duty, thick film, 15 kg₹1,98,912 + ₹35,804 GST

All rates are + 18% GST with free delivery. Compare every model on the band sealing machine price list.

Tell us your pouch

Send the pouch film, size, filled weight and your hourly count. We will tell you the model and help you find the setting.

Questions buyers ask

What temperature should I set on a band sealer?

It depends on the film and the belt speed, so there is no single number. Start at a moderate setting, run a scrap pouch and raise or lower the heat in small steps until the seal is even. The CS900 heats up to 300 °C.

Does a band sealer need warm-up time?

Yes, a few minutes, because the blocks are held at temperature. That is the trade-off against an impulse sealer, which is ready at once but seals only one bag at a time.

Band sealer kaise chalate hain?

Machine on karke kuch minute garam hone dein. Film ke hisaab se temperature aur belt speed set karein, coding wheel mein date lagayein aur khali pouch par test karein. Phir pouch ka muh seedha bands mein daalein.

Should I use the horizontal or vertical band sealer?

Use the vertical model if the product would spill or shift when the pouch is tilted, such as powders, granules or loose namkeen. Use the horizontal model for flat pouches whose contents stay put.

Can the band sealer print a date while sealing?

Yes. The CS900 embosses a date code with its coding wheel in the same pass, and the CS1100 prints one with a steel wheel. Fit the characters before the run.

Why are my band sealer seals leaking at the corners?

Usually the pouch was creased as it entered the bands. A fold at the end of the seal leaves a small channel. Feed each pouch flat and square into the belts.

Send your requirement

Tell us the job rather than the model number — what you pack, how many a day and the city.

Call +91 95822 69346+91 98184 33150

Please put in a name and a mobile number we can reach.

Delivery is free anywhere in India, and GST is shown separately on every rate.

Written by the PackForge Technical Team, Faridabad. Updated 22 November 2026.

New Here? Grab Up to 10% Off Your First Order.

Subscribe with your email for first-order offers, deals and new arrivals.

Related machines and guides

Main machines

Carton Sealing Machine|Impulse Sealer|Heat Sealing Machine|Hand Sealing Machine|Strapping Machines and Tools|Stretch Wrapping Machines|Continuous Band Sealing Machine|Cup Sealing Machine|Induction Sealing Machine|Handheld Inkjet Printer

By product range

Fully Automatic Strapping Machines|Semi Automatic Strapping Machines|Low Table Top Strapping Machines|Pneumatic Strapping Tools|PP Strap Rolls|Strapping Machine Spares|Semi Automatic Carton Sealing Machines|Compact Carton Sealing Machines|Automatic Random Carton Sealing Machines|BOPP Tape Rolls|Carton Sealer Spares|Box Wrapping Machines with Top Press|Turntable Stretch Wrappers|Stretch Film Rolls|Wrapping Machine Spares|Hydraulic Hand Pallet Trucks|Drum Carriers & Lifters|Pallet Truck Spares & Wheels|Material Handling Trolleys|Machine Spare Parts

Machines and consumables

Fully Automatic Strapping Machine, PP Strap, Touch HMI|Semi Automatic Strapping Machine, Arch Type, PP Strap|Low Table Top Semi-Automatic Strapping Machine, Compact|Pneumatic strapping tool, PP and PET strap|Machine-grade PP strap|Semi Automatic Carton Sealing Machine, Top & Bottom Tape|Compact Carton Sealing Machine for Small Cartons|Automatic Random Carton Sealing Machine, Auto Size Adjust|Box Wrapping Machine with Top Press, Turntable Stretch Wrapper|Turntable stretch wrapper|Hydraulic Hand Pallet Truck, 2.5 Ton Capacity, Nylon / PU Wheels|Material Handling Drum Carrier & Lifter, 350 kg Capacity|Platform trolleys

Hand sealing machines

Hand Sealer|Poly Bag Sealing Machine|Pouch Sealing Machine|Packet Sealing Machine|Plastic Bag Sealing Machine|Bag Sealing Machine|8 Inch Hand Sealing Machine|12 Inch Hand Sealing Machine|16 Inch Hand Sealing Machine|Foot Sealing Machine|Table Top Sealing Machine|How to Choose a Hand Sealing Machine|Hand Sealer or Band Sealer?

Bengaluru

Packaging Machines in Bengaluru|Carton Sealing Machine in Bengaluru|Hand Sealing Machine in Bengaluru|Cities We Supply

PackForge AssistantFaridabad works · packaging, material handling, agriculture
ContactWhatsAppCall