Skip to content
Machines& Material Handling
Buy on Chat Login
PackForge Buy on Chat 0
Fault table · strap, head, feed

Strapping Machine Not Cutting or Not Sealing

When a strapping machine leaves the strap uncut, the weld open or the band loose, the cause usually sits in one of three places: the strap roll, the head, or the feed and tension parts. This guide helps you find which one before you order a part.

Buy Strapping Machines & Tools online

Price + 18% GST · free delivery across India · Buy Now or Add to Cart

View all →
Machine-grade PP strap
Made In India

Machine-grade PP strap

SKU: PF-PSR-01

by PackForge ( Made in India )

₹4,000+ ₹720 GST₹5,330
Save ₹1,330 (25% OFF)
Quick answer: A strapping machine that is not sealing usually has the wrong or sun-damaged strap, a dirty head or a worn heater blade. One that is not cutting usually has a worn cutter or strap scraps in the head. Check the strap grade and width first, clean the head, and only then replace the heater blade, cutter or grippers. Call service if the machine is dead or the fault returns.

Start with the strap, not the machine

Many complaints about a strapping machine turn out to be complaints about the strap. Before you open anything, look at the roll on the dispenser:

  • Grade: strap meant for hand tools tends to snag in a machine feed and weld badly. Use machine-grade PP strap.
  • Width: a strap that runs narrow slips in the gripper; one that runs thick can jam the track. Match the width your machine takes.
  • Age and storage: PP kept in sunlight turns brittle, and the weld is where it breaks.
  • Winding and core: an unevenly wound roll or a wrong core feeds in jerks and stops the strap returning cleanly.
  • Creases: creased or twisted strap from a dropped coil causes repeated jams.

Try a fresh roll of machine-grade PP strap. If the fault disappears, the machine was fine.

Strapping machine troubleshooting table

FaultLikely causeFix
Strap not cuttingWorn or chipped cutter; strap scraps in the headClean the head; replace the cutter
Strap not sealing, ends come apartHeater blade worn or dirty; wrong strap gradeClean or replace the heater blade; change to machine-grade strap
Weld looks fine but breaks under loadBrittle sun-damaged strap or uneven thicknessUse fresh strap stored indoors
Strap loose round the cartonTension set low; worn feed or tension rollersRaise tension a step; check rollers and belts
Strap cuts into the carton edgeTension too high for that boardLower the tension and test again
Strap does not feed round the archJam in the track; wrong width; creased strapSwitch off, clear the track, use the right strap
Strap does not return or slipsGripper worn; strap too narrowReplace grippers; check strap width
Repeated jams in the headCreased, sun-damaged or wrong-width strapChange the roll; clean the head
Machine completely deadSupply, switch or control faultCheck the socket and switch; then call service
PackForge 740H Semi Automatic Strapping Machine
PackForge 740H Semi Automatic Strapping Machine

How to check a machine that is not cutting or sealing

  1. Switch off and unplug before you touch the head.
  2. Change to a known good strap roll of machine-grade PP in the right width.
  3. Clean the head: remove dust, melted strap and small scraps around the heater blade and cutter with a brush, once the machine has cooled.
  4. Look at the cutter: a chipped or blunt edge leaves the tail hanging.
  5. Look at the heater blade: a burnt coating or a worn surface gives weak or no welds.
  6. Look at the grippers: worn teeth let the strap slip so it cannot be tensioned or held for sealing.
  7. Run three test straps on a carton and pull each weld by hand.
  8. Replace one part at a time and test again, so you know which part fixed it.

Heater and cutter settings that are not shown on the machine itself are set as per its manual. If you are not sure, ask us before changing them.

Faults by machine type

  • Arch type and low table machines: if the strap stops part-way round, the arch track has a jam or the strap is creased. Switch off and clear it along the arch.
  • 101H / 101L table machines: a jammed strap is ejected automatically. If jams keep coming, the strap is usually creased, sun-damaged or the wrong width.
  • 740H: the heating element welds without clips. Keep tension within its 15 to 45 kg range and lower it on thin board.
  • Pneumatic hand tool: weak tension or a weak seal often means the air line is below the 5 to 7 bar the tool needs.

For the normal operating routine, see how to use a strapping machine.

Wear parts to keep on the shelf

Heater blades, cutters and grippers do the actual sealing and cutting, and they wear in normal use. They are excluded from the 12-month warranty on manufacturing defects. Belts and rollers in the feed and tension path follow, and switches, sensors and boards fail less often but leave the machine dead.

PartSigns it is worn
Heater bladeWelds weak, open or uneven
CutterTail not cut or cut ragged
GrippersStrap slips, will not hold tension
Feed and tension rollers, beltsStrap loose or not returning cleanly

If you run a machine hard, order the wear parts before you need them. Send your machine model and a clear photo of the part on WhatsApp; the range is on strapping machine spares, and upkeep plans on AMC plans.

Semi Automatic Strapping Machine, Arch Type, PP Strap
Semi Automatic Strapping Machine, Arch Type, PP Strap

When to stop and call service

Call +91 95822 69346 or +91 98184 33150 if the machine is dead after you have checked the socket and switch, if a new heater blade or cutter does not solve the fault, or if the motor runs but nothing feeds. Send a short video of one cycle on WhatsApp with the model name. A spare part is not a service visit; if the fault is not obvious, ask for an engineer rather than replacing parts one by one.

Machines covered by this guide

The checks above apply to the PackForge semi automatic range: the semi automatic strapping machine, arch type (₹51,310 + ₹9,236 GST), the PackForge 101H / 101L semi automatic strapping machine (from ₹47,936 + ₹8,628 GST), the 101HD at ₹56,089 + ₹10,096 GST and the 740H at ₹1,17,376 + ₹21,128 GST. Prices for every model are on the strapping machine price list, and the full range on strapping machines and tools.

Send us one strapping cycle

WhatsApp a short video of the fault, the machine model and a photo of the strap roll label. We will tell you if it is the strap, a wear part or a service job.

Questions buyers ask

Why is my strapping machine not cutting the strap?

Usually the cutter is blunt or chipped, or strap scraps are packed around it in the head. Switch off, clean the head and look at the cutter edge. If it is worn, replace it; cutters are wear parts.

Why does the strap not seal properly?

The heater blade may be dirty or worn, or the strap may be the wrong grade, width or sun-damaged. Try a fresh roll of machine-grade PP strap first, then clean or replace the heater blade.

Strapping machine strap kyun nahi kaat rahi?

Aksar cutter ghis jata hai ya head mein strap ke tukde fas jaate hain. Machine band karke head saaf karein aur cutter dekhein. Ghisa ho to naya cutter lagayein. Phir bhi na kate to service ko call karein.

Are heater blades and cutters covered by warranty?

No. Heater blades, cutters and grippers are wear parts and are excluded from the 12-month warranty on manufacturing defects. PackForge holds wear parts in stock for the machines it sells.

Why does my strap keep jamming?

Repeated jams usually point to strap that is creased, sun-damaged or the wrong width, or to hand-tool strap used in a machine. Change to an even, machine-grade roll stored away from sunlight.

Can you supply spares for a machine bought elsewhere?

Sometimes. It depends on the make and the part. Send the model plate and a clear photo of the part on WhatsApp and you will get a straight yes or no.

Send your requirement

Tell us the job rather than the model number — what you pack, how many a day and the city.

Call +91 95822 69346+91 98184 33150

Please put in a name and a mobile number we can reach.

Delivery is free anywhere in India, and GST is shown separately on every rate.

Written by the PackForge Technical Team, Faridabad. Updated 22 November 2026.

New Here? Grab Up to 10% Off Your First Order.

Subscribe with your email for first-order offers, deals and new arrivals.

Related machines and guides

Main machines

Carton Sealing Machine|Impulse Sealer|Heat Sealing Machine|Hand Sealing Machine|Strapping Machines and Tools|Stretch Wrapping Machines|Continuous Band Sealing Machine|Cup Sealing Machine|Induction Sealing Machine|Handheld Inkjet Printer

By product range

Fully Automatic Strapping Machines|Semi Automatic Strapping Machines|Low Table Top Strapping Machines|Pneumatic Strapping Tools|PP Strap Rolls|Strapping Machine Spares|Semi Automatic Carton Sealing Machines|Compact Carton Sealing Machines|Automatic Random Carton Sealing Machines|BOPP Tape Rolls|Carton Sealer Spares|Box Wrapping Machines with Top Press|Turntable Stretch Wrappers|Stretch Film Rolls|Wrapping Machine Spares|Hydraulic Hand Pallet Trucks|Drum Carriers & Lifters|Pallet Truck Spares & Wheels|Material Handling Trolleys|Machine Spare Parts

Machines and consumables

Fully Automatic Strapping Machine, PP Strap, Touch HMI|Semi Automatic Strapping Machine, Arch Type, PP Strap|Low Table Top Semi-Automatic Strapping Machine, Compact|Pneumatic strapping tool, PP and PET strap|Machine-grade PP strap|Semi Automatic Carton Sealing Machine, Top & Bottom Tape|Compact Carton Sealing Machine for Small Cartons|Automatic Random Carton Sealing Machine, Auto Size Adjust|Box Wrapping Machine with Top Press, Turntable Stretch Wrapper|Turntable stretch wrapper|Hydraulic Hand Pallet Truck, 2.5 Ton Capacity, Nylon / PU Wheels|Material Handling Drum Carrier & Lifter, 350 kg Capacity|Platform trolleys

Hand sealing machines

Hand Sealer|Poly Bag Sealing Machine|Pouch Sealing Machine|Packet Sealing Machine|Plastic Bag Sealing Machine|Bag Sealing Machine|8 Inch Hand Sealing Machine|12 Inch Hand Sealing Machine|16 Inch Hand Sealing Machine|Foot Sealing Machine|Table Top Sealing Machine|How to Choose a Hand Sealing Machine|Hand Sealer or Band Sealer?

Bengaluru

Packaging Machines in Bengaluru|Carton Sealing Machine in Bengaluru|Hand Sealing Machine in Bengaluru|Cities We Supply

PackForge AssistantFaridabad works · packaging, material handling, agriculture
ContactWhatsAppCall