PackForge 6030X Automatic Web Sealer with Shrink Tunnel

What is a fully automatic web sealer with shrink tunnel?

Products arrive on the infeed and are gathered into a fixed group. A curtain of PE or PVC film wraps round the group, and the seal is made across a length of up to 600 mm. The sealer draws 1.5 kW on 380 V three phase and needs compressed air at 6 kg / cm2. Bundles then enter the 1450 x 550 x 400 mm tunnel, which uses 23 kW and conveys at 0 - 8 metre per minute.

It suits plants running one bottle or can size for long stretches: packaged water, soft drinks, dairy and FMCG. Output goes up to 12 trays per minute, but each format change pauses the line for resetting, so frequent switching eats into that. Plants with a varied mix may do better with the semi automatic WS6540. Plan floor space for a 380 kg sealer plus a 300 kg tunnel.

Bundling bottles on the 6030X – 4 steps

1. 1
   Check air and powerConfirm 6 kg / cm2 at the sealer and live 380 V supply to both units before starting the tunnel heaters.
2. 2
   Load PE or PVC filmFit the film rolls, thread them through the sealing section and set the seal to your bundle width, within 600 mm.
3. 3
   Set the infeedAdjust the guides so bottles or cans arrive upright and evenly spaced, then pick a tunnel speed between 0 and 8 metre per minute.
4. 4
   Run and watchBegin at a lower pace, check the first bundles for tight film and clean seals, then work up towards 12 trays a minute.

• 0 - 12 trays / min
• 600 mm max sealing length
• Air at 6 kg / cm2
• Sealer 1.5 kW
• Tunnel 23 kW
• 1450 x 550 x 400 mm tunnel