PackForge WS6540 Semi Automatic Web Sealer with Shrink Tunnel

What is a semi automatic web sealer with shrink tunnel?

Film runs from a top roll and a bottom roll, joined into a curtain across the infeed. When the operator pushes a group through, the film wraps around it and the sealer closes and cuts the web across up to 650 mm. The 1.5 kW sealer manages up to 12 pcs per minute. The 21 kW tunnel carries 40 kg on its conveyor, shrinks up to 10 pcs a minute, and needs 10 min to heat.

Packaged water units, beverage and juice packers, and medium volume carton lines suit it well. Both units run on 380 V three phase and weigh 300 kg each, with conveyor height at 800 mm plus 50 mm of adjustment. Budget 22.5 kW of connected load. When one product and pack size stay fixed all shift, the fully automatic 6030X takes away hand grouping.

Making a water bottle bundle on the WS6540 – 4 steps

1. 1
   Heat the tunnel firstSwitch on the 5540L about 10 min before the first bundle so the chamber is at shrinking heat.
2. 2
   Thread both rollsFit the top and bottom film rolls and join them into a curtain across the 650 mm sealing area.
3. 3
   Push the groupLine up the bottles on the infeed, then push the group through the curtain so the sealer closes the film.
4. 4
   Shrink and coolLet each bundle pass through the tunnel at up to 10 pcs a minute. At day end, allow 15 min for cooling.

• 650 mm max sealing length
• Sealer 0 - 12 pcs / min
• Tunnel 0 - 10 pcs / min
• 40 kg tunnel loading
• 22.5 kW on 380 V
• Conveyor 800 + 50 mm